Cloud Nightlight Color-Changing LED conversion

Big Clive recently reviewed a cheap cloud-shaped nightlight from China, and later recorded a video showing how to convert it to use color-changing RGB LEDs:

I wanted to build one myself, and already had the LEDs, so I ordered a cloud nightlight from China. It was a little less than $2.00 USD shipped and arrived approximately 5 weeks later. Right away I had problems with it as it was damaged; the plug and circuit board were both loose. I was worried the screw that holds the plug might be stripped, but fortunately it was not and I was able to repair it. With everything in place, I tried it out, and it looks very nice:

(more…)

LED Light Bulb Kit from China

DIY LED Bulb Assembled

I’m a huge fan of Big Clive, and watch his videos regularly. Back in December he built a DIY LED bulb kit from China, and as soon as I finished the video I ordered a couple for myself! It’s a fairly simple kit with a lot of potential for customization. There’s a lot of solder joints but the overall assembly isn’t too complicated, and the theory behind how they work is fascinating and not too hard to comprehend. Best of all, with prices well below $2 shipped, they’re cheap fun! I recently assembled one of these kits so I can review it and share what I’ve learned so far.

(more…)

LED Test Box from China

LED Test boxThis little LED test box couldn’t be simpler – pop an LED into the tester, push the button, and see it light up. The top header accommodates standard LEDs with two leads, and the bottom headers accommodate 4-pin “piranha” LEDs. I use it frequently when assembling LED lighting projects or to quickly test a new batch of LEDs. It’s a great value for the approximately $2.00 USD that I paid for it. With that said it has some issues, and there are a few things to be aware of when using these testers.

Build Quality

You can’t expect much for $2, but the quality is fine for the price. The biggest issue I have is the headers; they don’t always make good contact with the leads on the LEDs, especially the bottom rows for piranha LEDs. So sometimes I have to fiddle around with the LEDs to get solid contact. The other minor issue is the battery compartment, it’s fairly tight and I’ve had some trouble figuring out how to best orient the battery so it will fit with the case closed. With a little trial and error though, it’s possible.

These are minor quibbles, and acceptable given the price. But there are some more concerning issues with the circuit itself, which I’ll cover in the next couple sections.

(more…)